Sealing foils for PCR / qPCR plates

Advantages at a glance

Clear adhesive film
Peelable
Suitable for PCR/optical applications
Made from transparent polyester

€131.96*

pack size

100 seals

Product number: I2012.0100
Ready to ship today,
Delivery time 1-2 workdays

Shipment: not cooled. Store at +15°C to +30°C. For laboratory usage only!

Product information "Sealing foils for PCR / qPCR plates"

Clear, strongly adhesive sealing foils to peel off again. Applicable, e.g. for PCR plates / qPCR plates or other optical applications, e.g. fluorescence or colorimetric measurements. The film is not intended to be pierced with a pipette tip.

- The sealing foils are made of a durable, transparent polyester film with a coating of strong adhesive.
- The seals prevent cross over of individual samples and at the same time reliably prevention from evaporating.
- The seals are suitable for normal PCR, and also for qPCR.
- The seals can be used for PCR as well as for the storage of important samples.

Removal: features adhesive-free end tabs for easy removal, will not leave a sticky residue on the plate surface following removal.

FAQs

Yes, the used plates and foils could influence the assay performance according to several scientific studies (e.g. Reiter and Pfaffl 2008: Effects of Plate Position, Plate Type and Sealing Systems on Real-Time PCR Results, Biotechnology & Biotechnological Equipment, 22:3, 824-828, DOI: 10.1080/13102818.2008.10817561).

In general, white qPCR plates (e.g. Genaxxon’s I2017) have a lower light scattering and thus a higher signal strength than transparent qPCR plates (e.g. Genaxxon’s I2004, I2010, I2031). If you have a weakly expressed target or a only small amounts of sample material, we recommend using a white qPCR plate.

Beside this, it is essential to use optically clear foils for your qPCR. We do not recommend using “normal” PCR foils as adhesive residues and transparency differences in the material may lead to inhomogeneity during your qPCR assay.

Genaxxon offers different qPCR foils: a strongly adhesive foil (I2012) that securely seal the plate immediately, and a pressure-sensitive foil (I2248) that adheres to the plate by applying strong pressure.

Specifications:
Clear adhesive film
Peelable
Suitable for PCR/optical applications
Dimensions: 135 x 80 mm
Made from transparent polyester

Applikation / Application:

recommended for PCR, qPCR other optical applications (e.g. fluorescence or colorimetric measurements) sample storage

Einheiten / Units:

Quelle / Source:

Polyester

Sicherheits Hinweise / Safety

Klassifizierungen / Classification

eclass-Nr: 32-16-05-02

Documents - Protocols - Downloads :

Here you will find information and further literature. For further documents (certificates with additional lot numbers, safety data sheets in other languages, further product information) please contact Genaxxon biosience at: info@genaxxon.com or phone: +49 731 3608 123.

Documents:

Certificate
Product description
General Data 1

Listed below are articles and references, in which the authors trust in the high quality of this Genaxxon product.
Source: NCBI PubMed

qPCR adhesive plate seals

From €148.84*

Details