G5 HiFi DNA Polymerase
Order number: M3124.0100
Shipping: Shipment on wet ice. Store at -20°C. For laboratory usage only! Delivery time: 3- 8 working days
For detailed information on the delivery date, please contact Genaxxon.
*Prices plus VAT plus shipping costs
G5 HiFi DNA Polymerase is a thermostable enzyme with 5'-3 'DNA polymerase and 3'-5' proof-reading exonuclease activity. The enzyme shows an extremely high amplification accuracy at a very high speed with a very low error rate (about 50 times more accurate than Taq polymerase).
The G5 HiFi DNA Polymerase comes with two different 5-fold buffers. Buffer A is intended for the stable and reproducible amplification of long fragments. Buffer B is optimized for the amplification of GC-rich or complex templates. Both buffers already contain dNTPs. The optimized G5 HiFi polymerase buffers offer very high accuracy (50 times higher than Taq DNA polymerase), high performance and better success in amplifying of complex or longer templates, unpurified sample material at fast cycle times.
Features:
- High Fidelity proofreading DNA polymearse.
- Extrem high amplification rate (up to 6000bp per minute).
- Error rate about 6-times less than that of Pfu or Pwo, about 50-times less compared to Taq.
- For long PCR fragments (up to 20 kb for plasmid DNA or up to 7 kb for genomic DNA.
- 5'-3' polymerase acitivity and 3'-5' exonuclease activity.
- generates blund ends.
More High-Fidelity Proofreading Polymerases from Genaxxon bioscience:
- M3002 Pwo Proofreading Polymerase >
- M3003 ReproFast Proofreading Polymerase >
- M3004 Pfu Proofreading Polymerase >
- M3012 ReproHot (KOD) Proofreading Polymerase >
- M3030 ExactRun (Phusion like) Proofreading Polymerase >
With our high quality dNTPs as Set (M3015.4100 and M3015.0250) > or Mix (M3016.1010) > or our DNA Ladders > and our favourable standard agarose (M3044) > we can offer additional products for your PCR.
- Hotstart G5 HiFi DNA Polymerase is one of the most accurate thermostable polymerase available. - Hotstart G5 HiFi DNA Polymerase possesses 5'-3' polymerase activity, 3'-5' exonuclease activity - Hotstart G5 HiFi DNA Polymerase will generate blunt-ended products. - Hotstart G5 HiFi DNA Polymerase is supplied with buffer.
Technical Data:
Specifications:
2 units/µL
3´-5´ Exonuklease activity (proof-reading activity)
built-in hotstart technology
PCR reaction buffers already including dNTPs
application:
Proof-reading DNA polymerase for high fidelity and fast PCR.Source
E.coliSicherheits Hinweise / Safety
Klassifizierungen / Classification
eclass-Nr: 32-16-05-02Dokumente - Protokolle - Downloads
Here you will find information and further literature on G5 HiFi DNA Polymerase. For further documents (certificates with additional lot numbers, safety data sheets in other languages, further product information) please contact Genaxxon biosience at: info@genaxxon.com or phone: +49 731 3608 123.
Dokumente - Protokolle - Downloads
Reaction conditions may differ from PCR protocols already in use, as ExactRun DNA Polymerase tends to need higher denaturation and annealing temperatures. Especially annealing temperature may differ significantly from that of Taq DNA polymerase.
- The amount of enzyme depends on the amount of template and the length of the amplicon. Usually 1 unit ExactRun per 50µL reaction volume is enough for good results, but the optimal amount can range from 0.25 to 2 units per 50µL reaction.
It is highly recommended not to exceed 2 units/50µL!
- When cloning fragments amplified with ExactRun DNA Polymerase, blunt end cloning is possible. If TA cloning is required please refer to page 5 (Using PCR-product for T/A-cloning).
- The concentration of Mg2+ is critical for PCR. Excessive Mg2+ stabilises the DNA double strand. Excess Mg2+ can also stabilize spurious annealing of primers to incorrect template sites and decrease specificity. Inadequate Mg2+ may lead to lower product yield. The optimal Mg2+ concentration depends on the dNTP concentration, the specific template DNA and the sample buffer. In general, the optimal Mg2+ concentration is ca. 1mM over the total dNTP concentration for standard PCR. If any component of the PCR reaction contains EDTA or EGTA, the apparent Mg2+ optimum may be shifted to higher concentrations.
- PCR additives / DMSO: Some publications recommend to add 3% DMSO for GC-rich templates, which shall aid to denature DNA. In some cases DMSO may also be required for supercoiled plasmids. Other additives as formamide, glycerol, and betaine can also be used together with ExactRun.
At high concentrations of DMSO the annealing temperature has to be reduced between 3°C and 6°C.
- Primer annealing: For primers >20nt use an annealing temperature of 5°C above the lower primer Tm.
For primers <20nt use an annealing temperature of 7°C above the lower primer Tm.
Anneal for 10 – 30 sec.
A 2-step PCR protocol is recommended when primer Tm values are at least 69°C.
Extension depends on template length and complexity We recommend an extension rate of 15 sec./kb for low complex DNA (plasmids, lambda DNA or BAC-DNA) and an extension rate of 30 sec/kb for high complex DNA (genomic). Sometimes extension rates have to be decreased down to 40 sec/kb.
The amount of enzyme depends on the amount of template and the length of the amplicon. Usually 1 unit ExactRun per 50µL reaction volume is enough for good results, but the optimal amount can range from 0.25 to 2 units per 50µL reaction.
It is highly recommended not to exceed 2 units/50µL!
2. When cloning fragments amplified with ExactRun DNA Polymerase, blunt end cloning is possible. If TA cloning is required please refer to page 5 (Using PCR-product for T/A-cloning).
3. The concentration of Mg2+ is critical for PCR. Excessive Mg2+ stabilises the DNA double strand. Excess Mg2+ can also stabilize spurious annealing of primers to incorrect template sites and decrease specificity. Inadequate Mg2+ may lead to lower product yield. The optimal Mg2+ concentration depends on the dNTP concentration, the specific template DNA and the sample buffer. In general, the optimal Mg2+ concentration is ca. 1mM over the total dNTP concentration for standard PCR. If any component of the PCR reaction contains EDTA or EGTA, the apparent Mg2+ optimum may be shifted to higher concentrations.
4. PCR additives / DMSO: Some publications recommend to add 3% DMSO for GC-rich templates, which shall aid to denature DNA. In some cases DMSO may also be required for supercoiled plasmids. Other additives as formamide, glycerol, and betaine can also be used together with ExactRun.
At high concentrations of DMSO the annealing temperature has to be reduced between 3°C and 6°C.
5. Primer annealing: For primers >20nt use an annealing temperature of 5°C above the lower primer Tm.
For primers <20nt use an annealing temperature of 7°C above the lower primer Tm.
Anneal for 10 – 30 sec..
A 2-step PCR protocol is recommended when primer Tm values are at least 69°C.
Extension depends on template length and complexity We recommend an extension rate of 15 sec./kb for low complex DNA (plasmids, lambda DNA or BAC-DNA) and an extension rate of 30 sec/kb for high complex DNA (genomic). Sometimes extension rates have to be decreased down to 40 sec/kb.
Referenzen..
Hier finden Sie Artikel und Literaturzitate, in denen die Autoren auf die hohe Qualität dieses Genaxxonprodukts vertrauen.
Listed below are articles and references, in which the authors trust in the high quality of this Genaxxon product.
Dominik A. Herbst, Björn Boll, Georg Zocher, Thilo Stehle, Lutz Heide
J Biol Chem. 2013 Jan 18; 288(3): 1991–2003. Published online 2012 Nov 28. doi: 10.1074/jbc.M112.420182
PMCID: PMC3548506
