FrameStar® PCR plates have a two-component design, which combines the advantages of thin wall polypropylene tubes, for optimum PCR results and a rigid polycarbonate skirt and deck, for highest thermal stability and rigidity. This fully-skirted 384-well PCR plate with clear wells is recommended for Roche LightCycler 480 thermal cyclers.  The rigid 2-component design eliminates warping and distortion during PCR making it ideal for use with robotic systems. The fully-skirt allows for labelling or barcoding.

FrameStar® PCR plates have a two-component design, which combines the advantages of thin wall polypropylene tubes, for optimum PCR results and a rigid polycarbonate skirt and deck, for highest thermal stability and rigidity. This semi-skirted low profile plate is recommended for ABi™ Fast Block thermal cyclers. Low profile plates have shorter wells than standard profile plates, decreasing the "dead space" between the heated lid of the thermal cycler and the sample. This eliminates any chance of condensation forming on the side walls of the tubes, both preventing a reduction in PCR volume, and increasing the efficiency of the reaction. Low profile products are especially recommended for use with reaction volumes below 20µL. The rigid 2-component design eliminates warping and distortion during PCR making it ideal for use with robotic systems. The semi-skirt allows for labelling or barcoding.

(Nitrotetrazolium Blue chloride, Ditetrazolium dye, Nitro BT). A ditetrazolium compound for demonstrating succinic dehydrogenase activity or glucose-6-phophate dehydrogenase or xanthine oxidase. Used in conjunction with BCIP for detection of alkaline phosphatase. (Negi D.S. and Stephens R.J. (1977) J. Histochem. Cytochem., 25, 149, Vila V. et al. (1984) Clin. Chim. Acta, 138, 215.

96-well PCR plates. Thin walled for optimal heat transfer producing maximal PCR results. Designed for 0.2mL Thermal Cyclers. Flat and rigid upper plate. Sealing by film or caps, fully certified for PCR use. With black printed grid. Clear plastic for greater ease and clarity of use. Properties of plate material: Virgin Polypropylene, Surface characteristics optimised to reduced sample lose. Flexibility for variety of sealing methods. Clarity, Inertness and non porous. Continued performance after PCR at storage temperatures. Batch to batch consistency to maintain the same performance. Rigid design suitable for robotics. Low profile improves low volume PCR. Black grid printed for easy identification. Cut off corner for fast orientation.

Die CentriPure CP-0219 columns are specially designed for purification and desalting of oligonucleotides longer than 20 base pairs and from proteins greater than 25 kDa with minimal dilution. The gel bed has a volume of 0.5mL. Samples with a volume up to 100µL can be processed. Optimal purification and recovery is obtained with a sample volume of 50µL. Because the columns are rehydrated shortly before use, their shelf life (non-hydrated) at +15°C to +30°C is several years. More than 99% of impurities as salts, dNTPs or Dye terminators can be removed by our CentriPure columns. As a result you will get consitent and reliable signals from base 1 to 700. Applications: - Purification of DNA sequencing reactions.- Removal of free and labelled dNTP’s from DNA/RNA polymerisation reactions (e.g. RT-PCR, PCR, nick translation).- Purification/desalting of proteins. Removal of traces of phenol or exchange of buffer salts, as in multiple restriction digestions. These columns are far superior - in ease of use, speed, and non-toxicity - to such common techniques as phenol/chloroform extractions and ethanol precipitations.

GENAzol is a ready-to-use reagent for the isolation of high-quality total RNA or the simultaneous isolation of RNA, DNA and proteins from biological samples. With this single phase solution of phenol and guanidine isothiocyanate, RNA, DNA and proteins in different fractions from cell and tissue samples, e.g. isolated from humans, animals, plants, yeasts, bacteria or viruses (usually within an hour). This is a dangerous good with UN number UN2821. Not for sale outside the European Union. Properties of GENAzol:- Parallel isolation of RNA, DNA and protein from the same sample- Superior suitability for lysis even with difficult samples- Optimized formulations and protocols for tissues, cells, blood, viruses and bacteria. Reliable purification of RNA from samples of different volumes and sourcesGENAzol is also suitable for small amounts of tissue (50–100mg) and cells (5× 10E6) as well as for larger amounts of cells (>10E7) and contains protocols for the purification of RNA from human, animal, plant or bacterial Rehearse. GENAzol maintains the integrity of the RNA due to the very effective inhibition of RNase activity when cells and components are dissolved during sample homogenization. GENAzol enables the simultaneous processing of a large number of samples. The entire isolation step is usually completed in 1 hour. The total RNA isolated with GENAzol is free from protein and DNA contamination. Procedure for the isolation of RNA, DNA and proteinsGENAzol enables sequential precipitation of RNA, DNA and proteins from a single sample. After homogenizing the sample with GENAzol, chloroform is added and the homogenate separates into a clear aqueous top layer (which contains RNA), a boundary layer and a organic bottom layer (with DNA and proteins). RNA is precipitated from the aqueous layer with isopropanol. DNA precipitation from the organic boundary layer takes place with ethanol. Finally, the protein from the phenol-ethanol supernatant is precipitated with isopropanol. Precipitated RNA, DNA or protein is washed to remove impurities and then resuspended for use in subsequent applications.