PCR Tubes and Plates

Discover the groundbreaking 96-well low-profile PCR Plate, where sustainability meets the highest quality standards. The frame, produced from sustainable biopolymer, not only champions environmental conservation but also delivers exceptional performance for your PCR and qPCR applications. The 96-well fully-skirted low-profile PCR Plate fits a wide range of thermocyclers and is fully automation compatible. The plated are available with clear or white wells. Its robust frame is produced using a plant-derived biocomposite material, originated from sustainably cultivated plant biomass, replacing conventional petroleum-based plastics. The frame material remains structurally stable during thermal cycles, ensuring reliable handling by robotic systems and preserving the seal integrity of each well. This prevents any potential sample evaporation during thermal cycling. The use of this sustainable biocomposite material also achieves an impressive reduction of up to 51% in the plastic used for plate production. Have no concerns about potential impacts on your results – the thin-walled tubes are produced from 100% untreated medical-grade polypropylene. This material is biocompatible and has an inert low-binding surface. What this means is you don't have to worry about any problems with your PCR performance. Additionally, the 96-well PCR Plates are certified free from DNase, RNase, nucleases, and human gDNA. Every step counts on the journey to a more sustainable future! Join us and make the switch to PCR Plates made from biocomposite material now – for reduced greenhouse gas emissions and outstanding research outcomes.

The Genaxxon qPCR adhesive seals are made of a optically clear adhesive film, with a pressure activated clue. The film is peelable and thus perfectly suitable for qPCR and other imaging techniques including crystallization applications. The adhesive is released after pressure on the surface. - Optically clear seal specifically developed for optical applications, particularly qPCR- It is non sticky when removed from the packaging; this aids handling when wearing gloves- The adhesive is contained within small capsules, allowing light to pass through to ensure the optical clarity of the seal- Seal integrity range: -40 °C to 110 °C- Free from DNase, RNase, and human genomic DNA When the seal is in position, pressure can be applied to burst the capsules, releasing a strong adhesive only where the seal touches the raised well rims of the plate - the rest of the seal area above the wells remains optically clear

FrameStar® PCR plates have a two-component design, which combines the advantages of thin wall polypropylene tubes, for optimum PCR results and a rigid polycarbonate skirt and deck, for highest thermal stability and rigidity. This semi-skirted low profile plate is recommended for ABi™ Fast Block thermal cyclers. Low profile plates have shorter wells than standard profile plates, decreasing the "dead space" between the heated lid of the thermal cycler and the sample. This eliminates any chance of condensation forming on the side walls of the tubes, both preventing a reduction in PCR volume, and increasing the efficiency of the reaction. Low profile products are especially recommended for use with reaction volumes below 20µL. The rigid 2-component design eliminates warping and distortion during PCR making it ideal for use with robotic systems. The semi-skirt allows for labelling or barcoding.

Non-skirted, 96-well plates. Thin walled for optimal heat transfer producing maximal PCR results. Designed for 0.1mL Thermal Cyclers. Flat and rigid upper plate. Sealing by film or caps, Fully certified for PCR use. With white printed grid. White plastic, inert and non-porous. Properties of plate material: Virgin Polypropylene. Surface characteristics optimised to reduced sample lose. Flexibility for variety of sealing methods. Continued performance after PCR at storage temperatures. Batch to batch consistency to maintain the same performance. Rigid design suitable for robotics. Low profile improves low volume PCR. Black grid printed for easy identification. Cut off corner for fast orientation.

Standard half skirted, low profile, 96-well PCR plate for Roche LC480. Thin walled for optimal heat transfer producing maximal PCR results. Sealing by film or caps, Fully certified for PCR use. These plates can also be used in an ABi 9700 cycler. Properties of plate material: Virgin Polypropylene, Surface characteristics optimised to reduced sample lose. Flexibility for variety of sealing methods. Continued performance after PCR at storage temperatures. Batch to batch consistency to maintain the same performance. Low profile improves low volume PCR. Black grid printed for easy identification. Cut off corner for fast orientation. White polypropylene.Volume: 100µL

This plate is compatible with 96 well block cycler designed for skirted plates. The plate is made from polypropylene with low profile 0.15mL wells, black grid reference, and a cut corner at H1. Benefits: Maximum thermal conductivity for efficient heat transfer and precise thermal cycling. Raised well rims prevent cross contamination and facilitate effective sealing for reduced evaporation. Super clear wells maximise sample visibility. Low profile plates with a working volume of 150µL and a total volume of 200µL when used with sealing options. The I2010 and I2261 plate fits, e.g. into the qTower 2.0 from Analytik Jena or the LabChip GXII Touch HT from Perkin Elmer.

Standard 96-well PCR plates without frame can be used in all standard thermal cyclers with a 0.2mL block. Transparent plate with black coding (A-H; 1-12). Special features: Optimal heat transfer through low and uniform wall thicknesses.High quality raw materials.Precise clean room production.Strict quality controls (RNase and DNase free),.The thin, flexible plates can be easily cut.

8 Well PCR Tube Strip with attached flat caps. Obtain optimal heat transfer with our low-profile or standard PCR 8-tube strips, with individually attached caps (optically clear flat caps) which are made from 100% pure polypropylene. Low Profile PCR tube strips (working volume: <100µL, total well capacity: 200µL) are recommended for small reaction volumes down to 5µL! The Genaxxon PCR tube strips are PCR Performance testet. This means: free of detectable DNA-, DNase-/RNase-, PCR-Inhibitor free. The strips of 8 tubes with attached lid can be used in 48- and 96-well sample blocks. Each single tube can be easily sealed with the individually attached cap. Also available as 8 Tube Strips mit separate 8 Cap-Strips (I2263.0120 >). These 8 tube strips will give excellent results together with our realtime MastermixesGreenMastermix with green fluorescence dye (M3023) >ProbeMastermix without green fluorescence dye (m3045) > for realtime PCR with Probes, e.g. Taqman-Probes.

PCR cap strips (8 caps per strip) for sealing 96-well PCR plates or PCR tube strips. Strips can be removed after PCR and replaced without problems. Flat cap strips are ideal for fluorescence detection in real-time PCR.

Clear, strongly adhesive sealing foils to peel off again. Applicable, e.g. for PCR plates / qPCR plates or other optical applications, e.g. fluorescence or colorimetric measurements. The film is not intended to be pierced with a pipette tip. - The sealing foils are made of a durable, transparent polyester film with a coating of strong adhesive.- The seals prevent cross over of individual samples and at the same time reliably prevention from evaporating.- The seals are suitable for normal PCR, and also for qPCR.- The seals can be used for PCR as well as for the storage of important samples. Removal: features adhesive-free end tabs for easy removal, will not leave a sticky residue on the plate surface following removal.

FrameStar® PCR plates have a two-component design, which combines the advantages of thin wall polypropylene tubes, for optimum PCR results and a rigid polycarbonate skirt and deck, for highest thermal stability and rigidity. This fully-skirted 384-well PCR plate with clear wells is recommended for Roche LightCycler 480 thermal cyclers.  The rigid 2-component design eliminates warping and distortion during PCR making it ideal for use with robotic systems. The fully-skirt allows for labelling or barcoding.

Half skirted, rigid 96-well plates. Thin walled for optimal heat transfer producing maximal PCR results. Designed for 0.2mL Thermal Cyclers. Flat and rigid upper plate. Sealing by film or caps, Fully certified for PCR use. With black printed grid. White plastic, inert and non-porous. Properties of plate material: Virgin Polypropylene, Surface characteristics optimised to reduced sample lose. Flexibility for variety of sealing methods. Continued performance after PCR at storage temperatures. Batch to batch consistency to maintain the same performance. Rigid design suitable for robotics. Low profile improves low volume PCR. Black grid printed for easy identification. Cut off corner for fast orientation.

>8 well PCR tube strips without attached lids. Optimum heat transfer thanks to extra-thin walls made of 100% pure polypropylene. The thin-walled wells guarantee rapid temperature transfer and therefore fast PCR. Our low profile tube strips are an ideal combination for standard or realtime PCR of small reaction volumes. Low profile PCR tube strips (working volume: <100µL, total capacity of the wells: 200µL) are recommended for small reaction volumes up to 5µL! The Genaxxon PCR tube strips are free of detectable DNA, DNase/RNase, PCR inhibitors. Our realtime PCR mastermixes give excellent results in realtime PCR with the 8' strip tubes. GreenMastermix with a green fluorescent dye (M3023 >) for realtime PCR without probes. ProbeMastermix without green fluorescent dye (M3045 >) for realtime PCR with probes, e.g. Taqman probes.

120 low profile tube strips (8 tubes of 0.1mL each per strip) made from highly transparent Polypropylene. Shipped together with 120 cap strips (8 caps per strip) also made from highly transparent, flat caps. This combination is optimal suited for realtime PCR especially from small PCR reaction volumes (5–125µL (150µL maximum)). Advantage: - Low profile for small reaction volumens.- Thin walled tubes for optimal and fast heat transfer.- extra clear and transparent caps for realtime PCR The Vari-Strips will give excellent results together with our realtime MastermixesGreenMastermix with green fluorescence dye (M3023).ProbeMastermix without green fluorescence dye (m3045) for realtime PCR with Probes, e.g. Taqman-Probes. Also available as strips of 8 PCR tubes with individually tethered caps (I2221.0960).

Each PCR reaction tube comes with an attached lid and is made from PP without chemical softener. Each tube with attached lid for easy handling. Tubes are transparent and colourless. All tubes are tested free of endotoxins (pyrogen free) and free of Rnases and Dnases. Tubes autoclavable.

96-well PCR plates. Thin walled for optimal heat transfer producing maximal PCR results. Designed for 0.2mL Thermal Cyclers. Flat and rigid upper plate. Sealing by film or caps, fully certified for PCR use. With black printed grid. Clear plastic for greater ease and clarity of use. Properties of plate material: Virgin Polypropylene, Surface characteristics optimised to reduced sample lose. Flexibility for variety of sealing methods. Clarity, Inertness and non porous. Continued performance after PCR at storage temperatures. Batch to batch consistency to maintain the same performance. Rigid design suitable for robotics. Low profile improves low volume PCR. Black grid printed for easy identification. Cut off corner for fast orientation.

Optimum heat transfer with our standard PCR 8-tube strips made of 100% pure polypropylene. The thin-walled wells guarantee a rapid temperature transfer and therefore fast PCR. The 8-well tube strips are suitable for all standard 0.2mL block thermal cyclers. Made from pure polypropylene. The tubes are without attached lids. Recommended for low to medium throughput applications. Tube volume: 300µL Working volume: <200µL.

Clear, strongly adhesive sealing foils to peel off again. Applicable, e.g. for PCR plates / qPCR plates or other optical applications, e.g. fluorescence or colorimetric measurements. The film is not intended to be pierced with a pipette tip. These films are suitable for all plate types in 96-well format. - The sealing foils are made of a durable, transparent polyester film with a coating of strong adhesive.- The seals prevent cross over of individual samples and at the same time reliably prevention from evaporating.- The seals are suitable for normal PCR, and also for qPCR.- The seals can be used for PCR as well as for the storage of important samples. Removal: features adhesive-free end tabs for easy removal, will not leave a sticky residue on the plate surface following removal.

This transparent polyester-based film has a low strength adhesive. It is designed as a cost-effective plate sealing option for temporary storage or protection for applications such as centrifugation. The protruding ends allow easy application and removal.  These films are suitable for all plate types in 96-well format.