Advantages at a glance
- Low melting agarose
- ß-Agarase digestion possible
- For analytical gels
- For preparative gels
- Free shipping
- Shipping within 24h
- 30 days money back guarantee
- Purchase comfortable on account
Product information "Agarose LM - low melting"
Agarose LM is the original low melting agarose. This "molecular biology grade" agarose gives gels with better properties and higher transparency than the standard normal melting point agarose. The agarose is equivalent to SeaPlaque™ from Lonza. Agarose LM is a low melting agarose with a very high separation capacity for large DNA fragments (>1000 bp), RNA and proteins. Enzymatic manipulations (eg, digestion, ligation, PCR, etc.) can be performed in the molten gel. Extraction of the DNA is therefore not necessary. Low melting Agarose LM is excellently suited for digestion with β-agarase (S5223). Large DNA fragments can be isolated very gently. The low melting agarose LM is used in the analytical and preparative field. For optimal results, the gel should be stored for at least 1 hour before use at +2°C to +8°C.
Genaxxon offers agaroses for a wide variety of applications. There are agaroses with different melting points or with normal or high-resolution separation properties of DNA fragments.
Standard melting point agarose M3044 with standard resolution used in routine DNA electrophoresis for separation of a wide range of DNA fragments from 50bp up to 20kbp. This agarose is available as powder (Standard Agarose LE (M3044 >)) or as high-quality, multi-purpose tablets (M3054 >) available in blister packaging in 200 or 1,000 tablet quantities. These are compact, pre-weight and therefore easy-to-use.
Low melting/gelling temperature agarose recommended for rapid DNA gel extraction with the agarose-digesting enzyme, Agarase, as well as for “in-gel’ DNA treatment with enzymes or for bacterial transformation with nucleic acids directly after re-melting the gel.
High resolution agarose (normal melting or low melting) for high resolution elektrophoresis to differentiate DNA fragments with only 2 bp size difference: M3046 Agarose Tiny > (low melt, high resolution comparable to NuSieve®), or M3047 Agarose Tiny HT > (high gel strength, high resolution comparable to SeaKem®).
For the nontoxic staining of nucleic acids in agarose gels the highly sensitive fluorescent dye SafeGel red stain (M3193) or SafeGel green stain (M3191) is recommended.
Specifications:
Electroendosmosis (EEO): <0.10
Gel strength (1.0%): >200 g/cm2
Gel strength (1.5%): >1000 g/cm2
Gelling temperature (1.5%): <30°C
Melting temperature (1.5%): <65°C
Loss on drying: max. 10%
DNAse and RNAse: not detected
Application:
- for electrophoresis of DNA, RNA and proteins. - for enzymatic reaction in liquid agarose (in gel applications) - for immobilization of micro organisms or virus plaque assaysSource:
seaweedClassification:
Documents:
Safety Data SheetCertificate
Spec. Product Description
General Data 1
General Data 2
Source: NCBI PubMed
An advanced glioma cell invasion assay based on organotypic brain slice cultures
Tanja Eisemann, Barbara Costa, Jens Strelau, Michel Mittelbronn, Peter Angel, Heike Peterziel
BMC Cancer. 2018; 18: 103.
doi: 10.1186/s12885-018-4007-4
PMCID: PMC5789681
Agaroses – A Solution for Every Application from GENAXXON!
Accessory Items
High-quality Taq DNA Polymerase from Genaxxon is a highly processive 5' - 3' DNA Polymerase, lacking 3' - 5' exonuclease activity. The high processivity and fidelity of Genaxxon bioscience Taq Polymerase allows amplification of DNA fragment of >7 kb. Genaxxon bioscience Taq Polymerase is delivered with 10X reaction buffer and separate MgCL2.The enzyme is delivered with our buffer component 'Buffer-E'. The buffer is optimised for high yield amplification of DNA-templates. Our complete buffer contains 25mM MgCl2. Taq DNA Polymerase test sample available! No shipping costs within Germany. With our high quality dNTPs as Set (M3015.4100 and M3015.0250) or Mix (M3016.1010) or our DNA Ladders and our favourable standard agarose (M3044) we can offer additional high quality products for your PCR.
Our DNA marker GenLadder 100 bp Plus with loading dye is an ideal tool to determine the size of double stranded DNA in the range of 100 - 3000 bp. The additional bands at 1.5kbp and 3.0kbp allow to assign additional DNA fragment sizes in the range up to 3000 bp without using an additional 1kbp DNA marker. The Gene Ladder 100 bp Plus consists of 12 fragments in sizes between 100 - 1000bp spaced 100bp apart. In addition, there are further bands at 1500bp and 3000bp. The 500bp and 1500bp fragment show stronger intensity to allow easier identification. All fragments are 'blunt-ended'. The GenLadder can be directly labeled at the 5'-end with radioisotopes using T4 polynucleotide Kinase for visualisation by autoradiography. Fragment sizes (in base pairs): 3000 bp (40ng/5µL), 2x 1500 bp (70ng/5µL), 1000 bp (50ng/5µL), 900 bp (40ng/5µL), 800 bp (40ng/5µL), 700 bp (30ng/5µL), 600 bp (30ng/5µL), 2x 500 bp (90ng/5µL), 400 bp (40ng/5µL), 300 bp (30ng/5µL), 200 bp (40ng/5µL), 100 bp (40ng/5µL). The DNA marker is already dissolved in buffer containing orange G and Xylene cyanol FF as tracking dyes. The total concentration of the DNA-Marker is 0.1µg/µL (108µg/mL). The recommended amount of DNA marker per lane is 0,5μg (5µL). GenLadder DNA ladders are available in a ready-to-use format (premixed with 6X DNA Loading Dye): M3094 (GenLadder 1kbp extended up to 25 kbp ready-to-use) > and M3328 (GenLadder 1kbp ready-to-use) > or our ready-to-use premix M3072 (GenLadder 50bp) > with 6X Orange DNA Loading Dye. The DNA Gel Loading Dyes can also be ordered separately: M3308 (DNA Gel Loading Dye with Bromophenol and Xylene Cyanol FF) >, M3321 (DNA Gel Loading Dye with Orange G) >.
High-quality Taq DNA Polymerase from Genaxxon is a highly processive 5' - 3' DNA Polymerase, lacking 3' - 5' exonuclease activity. The high processivity and fidelity of Genaxxon bioscience Taq Polymerase allows amplification of DNA fragment of up to >7 kb. Genaxxon bioscience Taq Polymerase is delivered with 10X reaction buffer and separate MgCL2.The enzyme is delivered with our buffer component 'Buffer-S'. The buffer is optimised for high specificity amplification of DNA-templates. Our complete buffer contains 15mM MgCl2. Free Taq DNA Polymerase test sample available!No shipping costs within Germany. With our high quality dNTPs as Set (M3015.4100 and M3015.0250) or Mix (M3016.1010) or our DNA Ladders and our favourable standard agarose (M3044) we can offer additional high quality products for your PCR.
Highly pure, HPLC purified (>99%) dNTPs packaged as 4 separate 100mM solutions of dATP, dCTP, dGTP and dTTP for qPCR, RT-PCR, standard PCR, and Klenow reactions. Genaxxon’s dNTP solutions have been optimized for use in DNA amplification and other related methods. Genaxxon dNTPs contain no measurable bacterial or human DNA. For long term storage and/or for repeated use, our recommendation is to aliquot the stock solutions. Solutions of dNTP sodium salts (dATP, dCTP, dGTP und dTTP) Concentration: 100 mM each nucleotide Please have also a look on our broad range of nucleotides especially the dNTP mixes with 2 mM or 10 mM or the modified nucleotides, e.g. Biotin-11-dUTP. You can get additional products for your successful PCR as our Taq DNA Polymerse (M3001), or our proof-reading polymerases Pfu (M3004), Pwo (M3002) and ReproFast (M3003) as well as the ready-to-use RedMastermix (M3029), already including dNTPs.
With the synthetic GenLadder XLarge, even larger plasmid insertions and vector plasmids can be determined clearly and precisely in size by gel electrophoresis in the range of 250 - 25000 base pairs after restriction digests. The Genaxxon GenLadder XLarge shows 14 bands. The approximate mass of the DNA in each band is given for a 5µL load (0.52µg/lane). Additionally the 1000 bp and 3000 bp are intensified for better and faster orientation in 1.0 - 1.5% agarose gels. Please avoid repeated freez-thaw cycles. We recommend to portion the product into smaller aliquots. Source: PCR products and double-stranded DNA digested with appropriate restriction enzymes, are phenol extracted and equilibrated to 10mM Tris-HCl (pH8.0) and 10mM EDTA. GenLadder DNA ladders are available in a ready-to-use format (premixed with 6X DNA Loading Dye): M3094 (GenLadder 1kbp extended up to 25 kbp ready-to-use) > and M3328 (GenLadder 1kbp ready-to-use) > or our ready-to-use premix M3072 (GenLadder 50bp) > with 6X Orange DNA Loading Dye. The DNA Gel Loading Dyes can also be ordered separately: M3308 (DNA Gel Loading Dye with Bromophenol and Xylene Cyanol FF) >, M3321 (DNA Gel Loading Dye with Orange G) >.
Accessory Items
Our Agarose Tiny HT is a high resolution (+/-2 bp), normal melting agarose for fine resolution of small DNA fragments in the 20 bp to 1500 bp range. It can be used for genotyping, allele sizing and short tandem repeat analysis. Agarose Tiny works as a molecular screen and has twice the resolution of the finest sieving agaroses. It can discriminate between fragments which differ by only 2-4 bp in length and thus, is able to compete with acrylamide gels, being much easier to handle as the latter. Agarose Tiny HT 2% to 4% gels give similar results to Polyacrylamide 6% to 8% gels. For efficient resolution, the concentration of Agarose Tiny HT should be adjusted according to the range of band sizes analyzed, and the gel running buffer used (TAE or TBE). Genaxxon offers Agaroses for different purposes. Two melting point options and normal or high resolution separation of DNA fragments are available.Standard agarose high melting point agarose M3044 with standard resolution used in routine DNA electrophoresis for separation of a wide range of DNA fragments from 50bp up to 20kbp. This agarose is available as powder (M3044 Agarose LE >) or as high-quality, multi-purpose tablets (M3054 >) available in blister packaging in 200 or 1,000 tablet quantities. These are compact, pre-weight and therefore easy-to-use. Low melting/gelling temperature agarose recommended for rapid DNA gel extraction with the agarose-digesting enzyme, Agarase, as well as for “in-gel’ DNA treatment with enzymes or for bacterial transformation with nucleic acids directly after re-melting the gel. High resolution agarose (normal melting or low melting) for high resolution elektrophoresis to differentiate DNA fragments with only 2 bp size difference: M3046 Agarose Tiny > (low melt, high resolution comparable to NuSieve®), or M3047 Agarose Tiny HT > (high gel strength, high resolution comparable to SeaKem®). For the nontoxic staining of nucleic acids in agarose gels the highly sensitive fluorescent dye SafeGel red stain (M3193) or SafeGel green stain (M3191) is recommended.
Agarose Tiny is a low-melting high resolution agarose that is suitable for molecular biology applications and produces gels with better separation properties and greater clarity than standard agarose. It is very transparent even at high gel concentrations (3.0 - 4.5%) and can be used with all buffer systems. The low melting temperature makes Agarose Tiny ideal for preparative DNA and RNA electrophoresis, while the low gelling temperature is ideal for tissue culture cell cloning experiments and viral plaque assays. In addition to the above mentioned properties, Agarose Tiny can also be used for high-resolution (2 bp) gel electrophoresis in the range from 10 to 500 bp. Example: PCR products or small DNA fragments after restriction digestion or in mutation analyses. Features:Like Lonza's SeaPlaque™, Agarose Tiny has a low melting point (<64°C, 3.0% gel) and gel point (<25°C, 3.0% gel) and low DNA-binding capacity. Their use is particularly recommended for preparative RNA and DNA gels. Genaxxon offers Agaroses for different purposes. Two melting point options and normal or high resolution separation of DNA fragments are available. Standard agarose high melting point agarose M3044 with standard resolution used in routine DNA electrophoresis for separation of a wide range of DNA fragments from 50bp up to 20kbp. This agarose is available as powder (M3044 Agarose LE >) or as high-quality, multi-purpose tablets (M3054 >) available in blister packaging in 200 or 1,000 tablet quantities. These are compact, pre-weight and therefore easy-to-use. Low melting/gelling temperature agarose recommended for rapid DNA gel extraction with the agarose-digesting enzyme, Agarase, as well as for “in-gel’ DNA treatment with enzymes or for bacterial transformation with nucleic acids directly after re-melting the gel. High resolution agarose (normal melting or low melting) for high resolution elektrophoresis to differentiate DNA fragments with only 2 bp size difference: M3046 Agarose Tiny > (low melt, high resolution comparable to NuSieve®), or M3047 Agarose Tiny HT > (high gel strength, high resolution comparable to SeaKem®). For the nontoxic staining of nucleic acids in agarose gels the highly sensitive fluorescent dye SafeGel red stain (M3193) or SafeGel green stain (M3191) is recommended.Recommended for the following applications:- RFLP (Restriction Fragment Length Polymorphism - AMPFLP (Amplified Fragment Length Polymorphism) - HVR (Hyper-Variable Regionen) - VNTR (Variable Numbers of Tandem Repeats) - STR (Short Tandem Repeats) - Tri und Tetra Nukleotid repeats