RealQ Plus 2x Master Mix for Probe - Low ROX

GreenMastermix High ROX optimised for realtime PCR assays in block systems that contains all components to perform quantitative PCR with the exception of primer and template DNA. This 2X PCR master mix is ready-to-use and contains optimised amounts of all ingredients. Advantages of the chemically modified SuperHot Taq polymerase used in the Genaxxon GreenMasterMix: Hotstart technology enables setup of PCR mixture at room temperatur No pipetting on ice necessary anymore No immediate further processing (PCR) necessary. The pipetted pre-PCR mixtures can be left at RT for up to 3 days. Amplification of GC-rich templates High yields No Primer dimers The Genaxxon SuperHot Taq DNA polymerase offers convenience and practicality, without compromising efficiency or specificity: 1. The chemical modification inhibits the polymerase, which prevents false priming at all temperatures tested, allowing for PCR reactions to be set up at RT (20°C to 25°C), and 2. "High mix stability allows pre-assemby of the plate in advance", which means PCR reactions can be prepared and stored at RT for up to three days before they are run, without affecting the results. The Green qPCR master mix high ROX contains all the necessary components in an optimized composition to carry out quantitative PCR: chemically modified Taq DNA Polymerase dATP, dCTP, dGTP, dTTP intercalating green fluorescent dye 500nM ROX optimized reaction buffer stabilizers and enhancers to enable even amplification of low copy number targets the small aliquote size of 1.25mL simplifies handling and storage (less freeze-thaw cycles per aliquote) Stability at +2°C to +8°C (refrigerator): minimum of 8 months. This Mastermix is specially suited for the following instruments: Applied Biosystems® 5700, 7000, 7300, 7700, 7900, 7900 HT, Eppendorf Realplex4, StepOne™ and StepOnePlus™. Other realtime PCR master mixes from Genaxxon are: M3023 - GreenMastermix No ROX >, M3045 - ProbeMastermix No ROX >, M3011 - GreenMastermix Low ROX >, M3031 - ProbeMastermix Low ROX >, M3052 - GreenMastermix High ROX >, M3010 - ProbeMastermix High ROX >.

ProbeMastermix High ROX optimised for realtime PCR assays in block systems that contains all components to perform quantitative PCR with the exception of primer and template DNA. This 2X Mastermix is ready-to-use and contains optimised amounts of all ingredients. Multiplex PCR: Applications at Genaxxon and at customers site have shown that the qPCR Probe Mastermix can be used for the simultaneous detection of up to four DNA targets in the same PCR reaction. For further details please refer to the product manual or contact us: info@genaxxon.com. Advantages of the Genaxxon ProbeMasterMix: Hotstart technology enables setup of PCR mixture at room temperatur No pipetting on ice necessary anymore No immediate further processing (PCR) necessary. The pipetted pre-PCR mixtures can be left at RT for up to 3 days. Amplification of GC-rich templates High yields No Primer dimers The Genaxxon SuperHot Taq DNA polymerase offers convenience and practicality, without compromising efficiency or specificity: 1. The chemical modification inhibits the polymerase, which prevents false priming at all temperatures tested, allowing for PCR reactions to be set up at RT (20°C to 25°C), and 2. "High mix stability allows pre-assemby of the plate in advance", which means PCR reactions can be prepared and stored at RT for up to three days before they are run, without affecting the results. The Probe qPCR master mix high ROX contains all the necessary components in an optimized composition to carry out quantitative PCR: chemically modified Taq DNA Polymerase dATP, dCTP, dGTP, dTTP 500nM ROX optimized reaction buffer stabilizers and enhancers to enable even amplification of low copy number targets the small aliquote size of 1.25mL simplifies handling and storage (less freeze-thaw cycles per aliquote) Stability at +2°C to +8°C (refrigerator): minimum of 8 months. This Mastermix is specially suited for the following instruments: Applied Biosystems® 5700, 7000, 7300, 7700, 7900, 7900 HT, Eppendorf Realplex4, StepOne™ and StepOnePlus™. Further realtime PCR Mastermixes and realtime FAST PCR Mastermixes can be found here: qPCR (Classic qPCR > or FAST and Multiplex qPCR >).

GreenMasterMix without ROX optimised for realtime PCR assays in block systems that contains all components to perform quantitative PCR with the exception of primer and template DNA. This 2X Mastermix is ready-to-use and contains optimised amounts of all ingredients. Advantages of the chemically modified SuperHot Taq polymerase used in the Genaxxon GreenMasterMix: Hotstart technology enables setup of PCR mixture at room temperatur No pipetting on ice necessary anymore No immediate further processing (PCR) necessary. The pipetted pre-PCR mixtures can be left at RT for up to 3 days. Amplification of GC-rich templates High yields No Primer dimers The Genaxxon SuperHot Taq DNA polymerase offers convenience and practicality, without compromising efficiency or specificity: 1. The chemical modification inhibits the polymerase, which prevents false priming at all temperatures tested, allowing for PCR reactions to be set up at RT (20°C to 25°C), and 2. "High mix stability allows pre-assemby of the plate in advance", which means PCR reactions can be prepared and stored at RT for up to three days before they are run, without affecting the results. The Green qPCR master mix without ROX contains all the necessary components in an optimized composition to carry out quantitative PCR: chemically modified Taq DNA Polymerase dATP, dCTP, dGTP, dTTP intercalating green fluorescent dye optimized reaction buffer stabilizers and enhancers to enable even amplification of low copy number targets the small aliquote size of 1.25mL simplifies handling and storage (less freeze-thaw cycles per aliquote) Stability at +2°C to +8°C (refrigerator): minimum of 8 months. This Mastermix is specially suited for the following instruments: BioRad CFX96 Touch™, CFX384 Touch™, CFX Connect™, DNA Engine Opticon® 2, Chromo4™, iCycler iQ™ and My iQ™ , Roche LightCycler® 480, LightCycler® 1536, LightCycler® Nano, LightCycler® 96 and QuantStudio™ instruments, Thermo Scientific™ PikoReal™, Cepheid SmartCycler®, Bio Molecular Systems Mic qPCR cycler, Qiagen Rotor Gene Q, Rotor Gene 6000, MyGo Mini and MyGo Pro. Further realtime PCR Mastermixes and realtime FAST PCR Mastermixes can be found here: qPCR (Classic qPCR > or FAST and Multiplex qPCR >).

ProbeMasterMix without ROX optimised for realtime PCR assays in block systems that contains all components to perform quantitative PCR with the exception of primer and template DNA. This 2X Mastermix is ready-to-use and contains optimised amounts of all ingredients. Multiplex PCR: Applications at Genaxxon and at customers site have shown that the qPCR Probe Mastermix can be used for the simultaneous detection of up to four DNA targets in the same PCR reaction. For further details please refer to the product manual or contact us: info@genaxxon.com. Advantages of the chemically modified SuperHot Taq polymerase used in the Genaxxon ProbeMasterMix: Hotstart technology enables setup of PCR mixture at room temperatur No pipetting on ice necessary anymore No immediate further processing (PCR) necessary. The pipetted pre-PCR mixtures can be left at RT for up to 3 days. Amplification of GC-rich templates High yields No Primer dimers The Genaxxon SuperHot Taq DNA polymerase offers convenience and practicality, without compromising efficiency or specificity: 1. The chemical modification inhibits the polymerase, which prevents false priming at all temperatures tested, allowing for PCR reactions to be set up at RT (20°C to 25°C), and 2. "High mix stability allows pre-assemby of the plate in advance", which means PCR reactions can be prepared and stored at RT for up to three days before they are run, without affecting the results. The Probe qPCR master mix without ROX contains all the necessary components in an optimized composition to carry out quantitative PCR. chemically modified Taq DNA Polymerase dATP, dCTP, dGTP, dTTP optimized reaction buffer stabilizers and enhancers to enable even amplification of low copy number targets the small aliquote size of 1.25mL simplifies handling and storage (less freeze-thaw cycles per aliquote) Stability at +2°C to +8°C (refrigerator): minimum of 8 months. This Mastermix is specially suited for the following instruments: BioRad CFX96 Touch™, CFX384 Touch™, CFX Connect™, DNA Engine Opticon® 2, Chromo4™, iCycler iQ™ and My iQ™ , Roche LightCycler® 480, LightCycler® 1536, LightCycler® Nano, LightCycler® 96 and QuantStudio™ instruments, Thermo Scientific™ PikoReal™, Cepheid SmartCycler®, Bio Molecular Systems Mic qPCR cycler, Qiagen Rotor Gene Q, Rotor Gene 6000, MyGo Mini and MyGo Pro. Further realtime PCR Mastermixes and realtime FAST PCR Mastermixes can be found here: qPCR (Classic qPCR > or FAST and Multiplex qPCR >).