Prestained Protein Marker - 10-245 kDa

Agarose LE is a standard agarose for the separation of DNA in the size range between 100bp and 25kbp. It is suitable for all analytical and preparative electrophoresis of nucleic acids in routine gel electrophoresis. Depending on the concentration of Agarose LE used, the size range of nucleic acid separation will vary between 100bp and 25kbp. The low EEO makes this useful for a broad range of applications: PCR product analysis, restriction enzyme digest analysis, separation of RNA before blotting, etc. This agarose is comparable with, e.g. Agarose BioRagent, low EEO from Sigma or with the Universal-Agarose, peqGOLD from Peqlab. Free Taq DNA Polymerase test sample available! No shipping costs within Germany. Genaxxon offers Agaroses for different purposes. Two melting point options and normal or high resolution separation of DNA fragments are available. Standard normal melting agarose M3044 with standard resolution used in routine DNA electrophoresis for separation of a wide range of DNA fragments from 100bp up to 25kbp. This agarose is available as powder (M3044 Agarose LE >) or as high-quality, multi-purpose tablets (M3054 >) available in blister packaging in 200 or 1,000 tablet quantities. They are compact, pre-weight and therefore easy-to-use. Low melting/gelling temperature agarose recommended for rapid DNA gel extraction with the agarose-digesting enzyme, agarase, as well as for "in-gel" DNA treatment with enzymes or for bacterial transformation with nucleic acids directly after re-melting the gel. High resolution agarose (normal melting or low melting) for high resolution elektrophoresis to differentiate DNA fragments with only 2 bp size difference: M3046 Agarose Tiny > (low melt, high resolution comparable to NuSieve®), or M3047 Agarose Tiny HT > (high gel strength, high resolution comparable to SeaKem®). For the nontoxic staining of nucleic acids in agarose gels the highly sensitive fluorescent dye SafeGel red stain (M3193) or SafeGel green stain (M3191) is recommended.

High-quality Taq DNA Polymerase from Genaxxon is a highly processive 5' - 3' DNA Polymerase, lacking 3' - 5' exonuclease activity. The high processivity and fidelity of Genaxxon bioscience Taq Polymerase allows amplification of DNA fragment of >7 kb. Genaxxon bioscience Taq Polymerase is delivered with 10X reaction buffer and separate MgCL2.The enzyme is delivered with our buffer component 'Buffer-E'. The buffer is optimised for high yield amplification of DNA-templates. Our complete buffer contains 25mM MgCl2. Taq DNA Polymerase test sample available! No shipping costs within Germany. With our high quality dNTPs as Set (M3015.4100 and M3015.0250) or Mix (M3016.1010) or our DNA Ladders and our favourable standard agarose (M3044) we can offer additional high quality products for your PCR.

Gel Loading Dye I 6X is a loading buffer for DNA application on gels. Buffer contains Glycerol, EDTA, Bromophenol Blue and Xylene cyanol. Genaxxon 6X DNA Loading Dye is used to prepare DNA markers and samples for loading on agarose or polyacrylamide gels. It contains two different dyes (bromophenol blue and xylene cyanol FF) for visual tracking of DNA migration during electrophoresis.

For reliable and easy PCR: PCR Master Mix for standard PCR applications (e.g. screenings) for amplifying DNA fragments <5kb. It is a premixed, ready-to-use solution containing Taq DNA Polymerase, dNTPs, MgCl2 and reaction buffers at optimal concentrations for efficient amplification of DNA templates by routine PCR (one tube, one pipetting step). Just add your primers and template DNA - that´s all.  The special formulation of our PCR Master Mix guarantees you reproducible results even after repeated freezing/thawing steps leading to good yields and sensitivity. The PCR Master Mix is efficient (no left over of reagents), scalable from 10µL to 50µL and stable for 24 months. Test sample available at a special price! The test sample price will be refunded on the first official order of the product.   Our Agaroses > and DNA Ladders > are ideally suited for subsequent electrophoresis of PCR products.

High-quality Taq DNA Polymerase from Genaxxon is a highly processive 5' - 3' DNA Polymerase, lacking 3' - 5' exonuclease activity. The high processivity and fidelity of Genaxxon bioscience Taq Polymerase allows amplification of DNA fragment of up to >7 kb. Genaxxon bioscience Taq Polymerase is delivered with 10X reaction buffer and separate MgCL2.The enzyme is delivered with our buffer component 'Buffer-S'. The buffer is optimised for high specificity amplification of DNA-templates. Our complete buffer contains 15mM MgCl2. Free Taq DNA Polymerase test sample available!No shipping costs within Germany. With our high quality dNTPs as Set (M3015.4100 and M3015.0250) or Mix (M3016.1010) or our DNA Ladders and our favourable standard agarose (M3044) we can offer additional high quality products for your PCR.

Agarose LM is the original low melting agarose. This "molecular biology grade" agarose gives gels with better properties and higher transparency than the standard normal melting point agarose. The agarose is equivalent to SeaPlaque™ from Lonza. Agarose LM is a low melting agarose with a very high separation capacity for large DNA fragments (>1000 bp), RNA and proteins. Enzymatic manipulations (eg, digestion, ligation, PCR, etc.) can be performed in the molten gel. Extraction of the DNA is therefore not necessary. Low melting Agarose LM is excellently suited for digestion with β-agarase (S5223). Large DNA fragments can be isolated very gently. The low melting agarose LM is used in the analytical and preparative field. For optimal results, the gel should be stored for at least 1 hour before use at +2°C to +8°C. Genaxxon offers agaroses for a wide variety of applications. There are agaroses with different melting points or with normal or high-resolution separation properties of DNA fragments. Standard melting point agarose M3044 with standard resolution used in routine DNA electrophoresis for separation of a wide range of DNA fragments from 50bp up to 20kbp. This agarose is available as powder (Standard Agarose LE (M3044 >)) or as high-quality, multi-purpose tablets (M3054 >) available in blister packaging in 200 or 1,000 tablet quantities. These are compact, pre-weight and therefore easy-to-use. Low melting/gelling temperature agarose recommended for rapid DNA gel extraction with the agarose-digesting enzyme, Agarase, as well as for “in-gel’ DNA treatment with enzymes or for bacterial transformation with nucleic acids directly after re-melting the gel. High resolution agarose (normal melting or low melting) for high resolution elektrophoresis to differentiate DNA fragments with only 2 bp size difference: M3046 Agarose Tiny > (low melt, high resolution comparable to NuSieve®), or M3047 Agarose Tiny HT > (high gel strength, high resolution comparable to SeaKem®). For the nontoxic staining of nucleic acids in agarose gels the highly sensitive fluorescent dye SafeGel red stain (M3193) or SafeGel green stain (M3191) is recommended.

DNA 6X Loading buffer is a special loading buffer for DNA application on gels that enables viusalization of DNA bands smaller than 100 bp without problems. Buffer contains Glycerol, EDTA, Orange G. The special dye gives the opportunity to detect even DNA bands running below 65 bp. Other loading dye: M3308 and PCR dye: M3309.

RedMasterMix (2x) - PCR MasterMix with red dye to help visualize pipetting and mixing steps. Electrophoresis can be performed immediately after PCR without the need of a gel loading buffer. This makes this MasterMix time efficient, cost efficient and a reliable choice for the best PCR results with high efficiency.  One tube, one pipetting step. RedMasterMix (2x) is delivered to you as a optimized, ready-to-use solution containing- Taq DNA Polymerase - dNTPs- MgCl2- a red dye- reaction bufferfor efficient amplification of DNA. Additionally the RedMasterMix (2x) contains an additive and a red dye for proceeding with electrophoresis after PCR without adding loading buffer. Just add your primers and template DNA. This PCR MasterMix (2x) has been optimized for use in routine PCR amplification of DNA templates in the range of 0.2-4kb. The special formulation of our PCR RedMasterMix (2x) can withstand repeated freezing/thawing without compromising yields, sensitivity or results, when used as directed. The PCR MasterMix with red dye is efficient (no left over of reagents), scalable from 10µL to 50µL and stable for at least 24 months.Our RedMastermix can also be used for Sanger sequencing. Just dilute the PCR reaction 1:8 after PCR, or purify using spin columns and then apply. Read now in our blog how Genaxxon's RedMasterMix can also simplify your laboratory work. Our Agaroses > and DNA Ladders > are ideally suited for subsequent electrophoresis of PCR products.